# Introduction:

This lesson is designed for middle school students with no previous knowledge of centripetal motion or centrifugal force. Also, this lesson does not require that students know anything of Newton's Laws of Motion. This lesson relies quite a bit on students' intuitive understanding of motion and experimentation with motion during the lesson. As such, this lesson could take as long as an hour and as short as thirty minutes depending on how much time you spend demonstrating and experimenting with the roller coaster models and matchbox cars (if you have access to them).

Any

# Learning Objectives:

• Explain centripetal force and its contribution to roller coaster enjoyment
• Describe work, energy, and the difference between potential and kinetic energy
• Understand the contribution of potential and kinetic energy to roller coaster function

# Guiding Question:

Why was the Scientific Revolution important and how did it contribute to progress?

# Materials:

Image, matchbox cars, hotwheels track, foam tubing cute length-wise, metal marbles, tape.

Books:

• The Story of Science Newton at the Center by Joy Hakim. Published by Smithsonian Books, 2005. (Chapter 13)
• The World's Wildest Roller Coasters by Michael Burgan. Published by Capstone Press, 2000.

# Procedure:

[Note: This lesson in its entirety can be found as an attached pdf and doc file. This lesson is appropriate for students who have not yet had an introduction to Newton’s Laws of Motion. Rather than delving into the full-fledged physics and algebraic manipulations, we’ll simply explore trends and observations they have through experimentation.]

## Lesson Summary:

• Review centripetal motion
• Experiment with speed and height of roller coaster cars
• Explain wok and energy
• Demonstrate the difference between potential and kinetic energy
• Explain the connection between height, speed, potential and kinetic energy with respect to roller coasters

## Lesson: Centripetal motion cont'd

[Start off this lesson with a Hot Wheels demonstration. Set up the Hot Wheels track with a hill and loops (either one or two). Experiment with students changing the speed of the initial car and seeing how far the car makes in through the loop. If you have a large group of students (more than 10) you may want to have more than one track and let small groups experiment. The goal of this activity is to have students notice a general relationship between speed and the ability of the car to stay on the track.]

So, we’ve already talked about roller coaster rides and what forces are acting. Imagine you're hurtling down the track, and hit a loop. You circle upside down. What force is holding you into your seat or pushing against you as you travel upside down? This is actually a bit of a trick question! If you remember our diagram [pull out the same force diagram from “Centripetal Motion” lesson], there is NO FORCE holding you in your seat!

As you move along the track and the track curves upwards, the cars (and your body) want to keep moving in a straight line, and they try to. But the track curving upwards applies a force that pushes you into a loop.

The yellow lines represent the straight path you and the cars want to continue following. The cars are moving very fast, so at some point, they want to head straight up! But the track continues to curve, applying a force and pushing the cars around.

The question is not 'What's holding the cars up?' The correct question is 'What's keeping the cars from flying straight up?'. Do you remember which force it is that pulls on the cars toward the center of rotation represented by the orange arrows? [Centripetal Force]

Staying in the Loop
But, how do we ensure that our velocity is great enough to keep us in a roller coaster loop?

Well, that gets us into energy...If I hold a marble five feet above the ground, is there any energy expended, or is there anything resulting from the fact that the force of gravity is pulling down on the marble? [No] But, there is potential, right? If I were to drop the marble, then gravity would pull the marble toward the ground, thereby causing the marble to go from an acceleration of zero to an acceleration greater than zero.
This stored energy is the potential energy of the marble, the energy held by the object as it is held up in the air before the force of gravity acts on it. The higher I hold the marble, the greater the force of gravity when I drop it (remember the sand experiments); the greater the initial height of the object, the greater the potential force of gravity.
But, what happens when the marble is actually dropped? That energy released by the movement of the marble is the kinetic energy of the marble. The faster the marble, or any body, moves due to gravity, the greater its kinetic energy. The greater the mass and speed of the object, the more kinetic energy it has.

How does all of this energy relate to roller coasters? In the simplest type of roller coasters, there are no mechanical forces pushing the cars. Rather, the cars get pulled to the top of the first hill and then dropped over the other side and the work of gravity and the inertia of the cars move them along the track.

If we were to examine a typical roller coaster, where would the most potential energy for the cars lie? Kinetic energy? (top of hill, bottom of hill, respectively). Now, try to create your own beginning hill and subsequent hill and find out how much potential energy you need at the beginning to have enough velocity to make it over the second hill. [For this activity, each student needs a piece of foam tubing sliced in half length-wise and a metal marble and tape to secure the coaster, or any other home-made roller coaster. I have students experiment for a while in small groups until they start to realize that the first hill must be higher than the second hill, otherwise the marble will never make it to the end. If groups finish early, have them experiment with loops in their coaster.]

[After this lesson, my students take a trip to an amusement park for a Physics Day. Their job is to document all of the hill-type roller coasters in the park, label their points of kinetic and potential energy, find out the height of the various first hills on all of the roller coasters, and find three examples of centrifugal force (not all roller coaster loops) and document those while also writing a description of what it feels like to experience centripetal force in their own words. You can find all of this in the assessment file.]

# Assessment:

Students are asked to answer a series of short answer questions. The assessment can be found as a separate wiki page here, where there is also a pdf and doc version available for download.

# Attached Files:

Non-profit Tax ID # 203478467